Drawer Divider Kits: Organize your Teclab cabinets with these drop-in kits. Made to fit “A” and “B” drawers in all cabinet widths. Each kit comes with 2 side rails, a drawer mat, and enough spacers to configure drawers in many ways.
Writing Surface
These kits turn any top “A” drawer into a convenient pull-out writing area.
Shelf Lips (SL)
Standard height is 2.25", but other heights are available as well.
Length and Depth is determined by the shelf dimensions.
(Tell us your width/depth requirements.)
Under-shelf Linear LED Light Kits
Under Shelf Light Kits install under Shelves or Cabinets and provide diffused light to the work surface.
Illustration shows the premium model with occupancy sensor.
| Length* | Standard Models** |
Starter Fixture*** |
Additional Fixture† |
Premium Models†† |
| 12" | LVT-12-LED | LVT-12-LED-FS | LVT-12-LED-FA | |
| 17" | LVT-17-LED | LVT-17-LED-FS | LVT-17-LED-FA | LVT-17-LED-OS |
| 31" | LVT-31-LED | LVT-31-LED-FS | LVT-31-LED-FA | LVT-31-LED-OS |
| 44" | LVT-44-LED | LVT-44-LED-FS | LVT-44-LED-FA | LVT-44-LED-OS |
| 58" | LVT-58-LED-OS |
*Length listed represents approximate light fixture length. Add 3"-4" to account for switches, power connectors and/or sensor.
**Standard Models are stand-alone kits and have 18w power supplies.
***Starter Fixtures have 60w power supplies to allow connecting Additional Fixtures.
†Additional Fixtures connect via an 18" cord to a Starter Fixture and share the existing power supply.
††Premium models have higher light output and offer an opptional occupancy sensor which shuts the fixture off after 30 minutes of inactivity and back on immediately when detection is found.
Magnifying Task Light (LMG‑2230)
The 5", 3-diopter magnifier lens is illuminated by powerful/dimmable LED light-source. It has heavy-duty, all-metal construction with a sleek design, adjustable arm and excellent light output making it suitable for a variety of industrial applications. The clamp-on base holds the lamp securely to the work surface. UL listed. 115/120v.
Laboratories can contain some extremely valuable items, so for added security all drawers and doors in a Teclab casework cabinet can be fitted with locks. Each door of the wall cabinets can also be fitted with a lock on the front face. All locks can be keyed in various combinations.
Label Holders
Our aluminum label holders can be mounted on any door or drawer. This provides the most efficient means of keeping track of items in your laboratory. With a handsome brushed finish, our label holders are useful additions to every laboratory.
LH-35175 for 3" x 2" cards.
LH-55375 for 5" x 3" cards.
Drying Racks
Drying Racks are an important addition to any work station to keep your laboratory organized allowing you to operate more efficiently. Teclab has a full line of Stainless Steel and Epoxy Resin drying racks with built-in drip collector trays to keep work areas clean. Available in various board sizes and multiples of pegs to suit your laboratory needs. Our Stainless version is made of durable polished 304 Stainless Steel for years of trouble free use. The Epoxy Resin pegboards feature a no twist oval base design set at 30° for maximum support. Both Stainless Steel and Epoxy Resin drying racks are easy to install and clean thanks to removable pegs. Acrylic pegboards are available on request. Drying Racks also have a variety of mounting options too.
Stainless Steel:
| part # | dimensions | # of 6" pegs |
| DRS-3024 | 30" wide x 24" high | 25 pegs |
| DRS-3030 | 30" wide x 30" high | 50 pegs |
| DRS-3624 | 36" wide x 24" high | 30 pegs |
| DRS-3630 | 36" wide x 30" high | 60 pegs |
| DRS-3636 | 36" wide x 36" high | 66 pegs |
| DRS-4824 | 48" wide x 24" high | 40 pegs |
| DRS-4830 | 48" wide x 30" high | 48 pegs |
| DRS-4836 | 48" wide x 36" high | 88 pegs |
Epoxy Resin:
| part # | dimensions | # of 6" pegs |
| DRR-1824 | 18" wide x 24" high | 21 pegs |
| DRR-2030 | 20" wide x 30" high | 32 pegs |
| DRR-2424 | 24" wide x 24" high | 28 pegs |
| DRR-2430 | 24" wide x 30" high | 39 pegs |
| DRR-3024 | 30" wide x 24" high | 39 pegs |
| DRR-3030 | 30" wide x 30" high | 46 pegs |
| DRR-3036 | 30" wide x 36" high | 56 pegs |
| DRR-3230 | 32" wide x 30" high | 53 pegs |
| DRR-3624 | 36" wide x 24" high | 43 pegs |
| DRR-3630 | 36" wide x 30" high | 60 pegs |
| DRR-3636 | 36" wide x 36" high | 68 pegs |
| DRR-4836 | 48" wide x 36" high | 96 pegs |
Faucets
Mixing Faucets:
FM8-412 Hot & Cold Mixing Faucet with 8" Gooseneck Spout
FM8-412-EW Mixing Faucet with 8" Gooseneck Spout & Eyewash
FM8-412-MW Wall Mounted Mixing Faucet with 8" Gooseneck Spout
FM8-412-VB Vacuum Breaker Mixing Faucet
Single Faucets:
FS8-612 Cold Water Faucet with 8" Gooseneck Spout
FS8-612-DI Distilled/Deionized Water Faucet with 8" Gooseneck Spout
F6-412 Deck Mounted Single Spout (for use with foot pedal valves)
xx-xxxx-FP Foot Pedal Valves (Xs are the cabinet part#)
Safety Washes
EW-10.5-SA Deck Mounted Swing Away Eye Wash
SS-EW Combo Safety Shower, Eye/Face Wash
EW-HH Deck Mounted Hand Held Eye Wash
Stainless Steel Sinks
Teclab’s stainless steel sinks are available in single and double bowl styles. A large choice of sink sizes makes outfitting your laboratory easy. Seamlessly formed of 18 gauge, 304 nickel bearing stainless these durable sinks are hand blended to a lustrous satin finish. To prevent condensation and dampen sound the underside is fully undercoated. All stainless steel sinks are furnished with 1 faucet hole.
Stainless Steel Single Bowl Sinks:
| part # | Bowl Size |
SSS-1517  |
12" x 12" x 7 1/2" |
| SSS-1522 |
11 1/2" x 16" x 7 1/2" |
| SSS-1716 |
14" x 10" x 7 1/2" |
| SSS-1720 |
14" x 14" x 7 1/2" |
| SSS-1722 |
131/2" x 16" x 7 1/2" |
| SSS-1918 |
16" x 11 1/2" x 7 1/2" |
| SSS-1918-ADA |
16" x 11 1/2" x 5 1/2" |
| SSS-1919 |
16" x 13 1/2" x 7 1/2" |
| SSS-2022 |
16" x 16" x 7 1/2" |
| SSS-2219 |
18" x 14" x 7 1/2" |
| SSS-2222 |
19" x 16" x 7 1/2" |
| SSS-2521 |
21" x 15 3/4" x 8" |
| SSS-2521-ADA |
21" x 15 3/4" x 5 1/2" |
| SSS-3122 |
28" x 16" x 7 1/2" |
Stainless Steel Double Bowl Sinks:
| part # | Bowl Size |
| SSS-2519 |
10" x 14" x 7 5/8" |
| SSS-2918 |
12" x 12" x 7 5/8" |
| SSS-2922 |
11 1/2" x 16" x 7 5/8" |
| SSS-3319 |
14" x 14" x 7 5/8" |
| SSS-3321 |
13 1/2" x 16" x 7 7/8" |
| SSS-3722 |
16" x 16" x 7 5/8" |
| SSS-4322 |
16" x 16" x 7 5/8" |
Drop-in Resin Sinks
Teclab’s Epoxy Resin drop in sink gives you design flexibility and eliminates the need for bulky under-sink supports. The weight bearing lip surrounding the sink is set into the recessed opening of the work surface providing a streamlined look. It also makes this sink compliant with the Americans with Disabilities Act. The rounded exterior edges assist in the users comfort and safety. Rear corner drains also allow for placement of plumbing to the back of the cabinet freeing up valuable under counter storage space.
Resin Single Bowl Sinks:
| part # | Bowl Size |
| RS-03 |
12" x 8" x 6" |
| RS-05 |
14" x 10" x 6" |
| RS-05-ADA |
14" x 10" x 5" |
| RS-10 |
16" x 8" x 7" |
| RS-15 |
16" x 12" x 8" |
| RS-20 |
16" x 16" x 7 1/2" |
| RS-24 |
18" x 14" x 10 1/2" |
| RS-25 |
18" x 15" x 8" |
| RS-25-ADA |
18" x 15" x 5" |
| RS-30 |
18" x 15" x 11" |
| RS-32 |
18" x 15" x 15 3/4" |
| RS-33 |
21" x 17" x 10" |
| RS-45 |
21 1/2" x 15 1/2" x 11" |
| RS-50 |
24" x 16" x 8" |
| RS-52 |
24" x 18" x 10 3/4" |
| RS-55 |
25" x 15" x 10" |
| RS-55-ADA |
25" x 15" x 4.75" |
| RS-59 |
28" x 15" x 12" |
| RS-61 |
30" x 16" x 18" |
| RS-68 |
30" x 16" x 10" |
Resin Double Bowl Sinks*:
(*A pair of single drop-in sinks are installed side-by-side with a 1" worksurface strip between the two installed sinks.)
| part # | Each Bowl Size |
| RS-0303 |
12" x 8" x 6" |
| RS-0505 |
14" x 10" x 6" |
| RS-1010 |
16" x 8" x 7" |
| RS-1515 |
16" x 12" x 8" |
Resin Cup Sinks:
| CS-36 |
3" x 6" |
| CS-39 |
3" x 9" |
| CS-66 |
6" x 6" |
| CS-88 |
8" x 8" |
Gas/Air/Vacuum Nozzles
Deck Mounted:
GAV-D-SN Deck Mounted Gas, Air or Vacuum Single Nozzle
GAV-D-DN Deck Mounted Gas, Air or Vacuum Double Nozzle
GAV-D-QN Deck Mounted Gas, Air or Vacuum Quad Nozzle
Panel Mounted:
GAV-P-SN Panel Mounted Gas, Air or Vacuum Single Nozzle
GAV-P-DN Panel Mounted Gas, Air or Vacuum Double Nozzle
Wall Mounted:
GAV-W-SN Wall Mounted Gas, Air or Vacuum Single Nozzle
GAV-W-SN Wall Mounted Gas, Air or Vacuum Double Nozzle
Electrical Power Kit (EP‑1) shown on all components with 'EP' suffix): EP- 1 Kit includes 4, 5, or 6 15 amp, 110 volt grounded outlets and combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly. The EP-1 Kit is supplied as standard with Powered Shelf Supports, Powered Back Guards, PL-10 and PL-15 Panel Legs, AP3-EP Aprons, and is available as an integral part of several Base Cabinets.
Electrical Power Kit (EP‑2) includes 4, 6, or 8 15 amp, 110 volt grounded duplex outlets and combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (EP‑3) includes 4, 6, or 8 20 amp, 110 volt grounded duplex outlets and combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (EP‑4) (not shown) includes 4 15 amp, 220 volt grounded duplex outlets, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (GFI) (not shown) includes Ground Fault Interrupter (GFI) outlets and combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Work Surface Mounted Electrical Pedestal Assemblies
Electrical Pedestal Assemblies are mounted on work surfaces virtually anywhere you need them making all your electrical connections easier. Switching from tool to tool is made effortless without the need to bend down to floor level just to change power sources. Available in several combinations of outlets and voltages, the pedestal assemblies are also UL listed and have provisions for a grounding screw. Each electrical outlet box has a brushed aluminum finish and 3/4" NPSM mounting shank assembly. Keep these items in mind when planning your next laboratory.
| Description | Pedestal Alone | 110V 15AMP | 110V 20AMP | 110V 15AMP GFI | 110V 20AMP GFI | 220V 15AMP |
| Single Sided, Single Pedestal |
EP-1310 | EP-1310-EP2 | EP-1310-EP3 | EP-1310-GFI-15A | EP-1310-GFI-20A | EP-1310-EP4 |
| Single Sided, Double Pedestal |
EP-1312 | EP-1312-EP2 | EP-1312-EP3 | EP-1312-GFI-15A | EP-1312-GFI-20A | EP-1312-EP4 |
| Double Sided, Single Pedestal |
EP-1311 | EP-1311-EP2 | EP-1311-EP3 | EP-1311-GFI-15A | EP-1311-GFI-20A | EP-1311-EP4 |
| Double Sided, Double Pedestal |
EP-1313 | EP-1313-EP2 | EP-1313-EP3 | EP-1313-GFI-15A | EP-1313-GFI-20A | EP-1313-EP4 |
Please call for electrical requirements not shown here.
Powered Back Guards (variable length x 4" H x 2" D) are available in lengths to match the length of the work surface or shelf and come standard with Electrical Power Kit EP‑1 (other EP kits are available). PBG‑72‑EP is 72" long providing 6 electrical outlets in EP‑1 kit, PBG‑60‑EP is 60" long providing 5 electrical outlets in EP‑1 kit, and PBG‑96‑EP is 96" long providing 8 electrical outlets in 2 EP‑1 kits.
Keyboard Tray: (KBT-30-MT)
Our Keyboard Tray has tilt adjustment and is mounted on a slide. It includes a movable mouse tray suitable for left or right handed use.
Monitor Arms: come in several variations to suit your specific needs.
MAHD-3500 - Radial Arm Monitor Holder. Holds up to 27" screens.
MAHD-7500 - Radial Arm Monitor Holder. Holds up to 43" screens.
MAHD-7509 - Radial Arm Monitor Holder w/ Flip-Up Keyboard Tray. Holds up to 27" screens.
MAHD-9120 - Side by Side Monitor Holder. Holds up to 24" Sceens
MAHD-9120-Q - Quad Monitor Holder. Holds up to 24" Sceens
MAHD-1000 - Fixed Monitor Holder
(For TES Bench Cross-Supports)
CPU Holders are 20" high and have adjustable width.
CPU-1020 (Mounts to underside of work surface and to side of base cabinet.)
CPU-1020-M (Both halves mount to underside of work surface.)
2" Grommets: (GRM-2) help eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords. Push these grommets into place.
