Customize your Teclab work stations with these versatile components and accessories.
Drawer Divider Kits: Organize your Teclab cabinets with these drop-in kits. Made to fit A and B drawers in all cabinet widths. Each kit comes with 2 side rails, a drawer mat, and enough spacers to configure drawers in many ways.
Under-shelf Linear LED Light Kits
Under Shelf Light Kits install under Shelves or Cabinets and provide diffused light to the work surface.
Illustration shows the premium model with occupancy sensor.
*Length listed represents approximate light fixture length. Add 3"-4" to account for switches, power connectors and/or sensor.
**Additional Fixtures connect via a short cord to an existing standard model and share the existing power supply.
***Premium models have higher light output and offer an opptional occupancy sensor which shuts the fixture off after 30 minutes of inactivity and back on immediately when detection is found.
Magnifying Task Light
The 3-diopter magnifier lens is illuminated by a 22 Watt circular fluorescent bulb. The clamp-on base holds the lamp securely to the work surface. UL listed. 115 VAC.
Small Parts Drawer Cabinet (4" H x 11 1/2" D x 34" W): SP‑8106 Small Parts Drawer Unit is equipped with 6 Drawers (2 3/4" H x 5 3/8" W x 11 1/4" D) each with two adjustable partitions per drawer. This utility unit provides needed storage of small parts and can be conveniently positioned on or hanging below TWS Shelf.
Small Parts Drawer Cabinet (not shown) (10 3/4" H x 11 1/2" D x 34" W) The SP‑8118 is similar to the SP-8106 but is equipped with 18 drawers.
Small Parts Drawer Spacers (not shown): XP‑8104 Box of 12 each for use with SP-8118 and SP-8106 Small Parts Drawer Cabinets.
Electrical Power Kit (EP‑1) shown on all components with 'EP' suffix): EP- 1 Kit includes 4, 5, or 6 15 amp, 110 volt grounded outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly. The EP-1 Kit is supplied as standard with Powered Shelf Supports, Powered Back Guards, PL-10 and PL-15 Panel Legs, AP3-EP Aprons, and is available as an integral part of several Base Cabinets.
Electrical Power Kit (EP‑2) includes 4, 6, or 8 15 amp, 110 volt grounded duplex outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (EP‑3) includes 4, 6, or 8 20 amp, 110 volt grounded duplex outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (EP‑4) includes 4 15 amp, 220 volt grounded duplex outlets, 9ft. power cord, plus all necessary components for assembly.
Electrical Power Kit (GFI) (not shown) includes Ground Fault Interrupter (GFI) outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
Stainless Steel Sinks
Teclab's stainless steel sinks are available in single and double bowl styles. A large choice of sink sizes makes outfitting your work area easy. Seamlessly formed of 18 gauge, 304 nickel bearing stainless these durable sinks are hand blended to a lustrous satin finish. To prevent condensation and dampen sound the underside is fully undercoated. All stainless steel sinks are furnished with 4 faucet holes.
Teclab's Epoxy Resin drop in sink gives you design flexibility and eliminates the need for bulky under-sink supports. The weight bearing lip surrounding the sink is set into the recessed opening of the work surface providing a streamlined look. It also makes this sink compliant with the Americans with Disabilities Act. The rounded exterior edges assist in the users comfort and safety. Rear corner drains also allow for placement of plumbing to the back of the cabinet freeing up valuable under counter storage space.
Many more sink options are available. Please call or see them in our Teclab Laboratory Furniture Section.
Keyboard Tray: (KBT-30-MT)
Our Keyboard Tray has tilt adjustment and is mounted on a slide. It includes a movable mouse tray suitable for left or right handed use.
Monitor Arms: come in several variations to suit your specific needs.
MAHD-3500 (18" Radial Arm Monitor Holder for flat screen)
MAHD-7500 (27" Radial Arm Monitor Holder for flat screen)
MAHD-7509 (27" Radial Arm Monitor w/ Flip-Up Keyboard Tray)
MAHD-9120 (Side by Side Flat Screen Monitor Holder)
MAHD-9120-Q (Quad Flat Screen Monitor Holder)