Teclab is an American company that has specialized in laboratory furniture since 1982 and sells direct to hospitals, pharmaceutical companies and research labs.
This page answers the questions lab managers, facilities teams and buyers ask most, from surfaces that are easy to clean to chemical storage and fume hoods. If you don’t see your question here, call or email us.
Quick facts
Most research labs need base and wall cabinets, chemical-resistant tops, sinks with faucets and eyewash, a fume hood, gas and vacuum fixtures, power at the bench, shelving and seating. Planning them together avoids gaps in utilities and storage.
Teclab supplies casework, work surfaces, sinks and faucets, gas, air and vacuum nozzles, fume hoods, shelving and seating, and offers free lab planning and design. See the sample research and development lab layout (PDF).
Yes, at no cost. Teclab’s planning and design team turns your room and requirements into a furniture layout you can review before you order, and can work directly with your architect or design team. Sample layouts include a research and development lab and a chemical laboratory.
Steel casework with an epoxy resin or phenolic resin top is the standard choice for wet chemistry, because both resist most acids, solvents and stains. Add acid and flammable storage cabinets, sinks, wall cabinets for glassware and a fume hood.
Teclab offers all of these, including Labconco fume hoods. See the sample chemical laboratory layout (PDF).
Smooth, nonporous surfaces with few seams are easiest to clean and disinfect, such as stainless steel cabinets and tops, or resin tops on powder-coated steel casework. Avoid wood, and avoid edges where liquid can collect. Mobile and hanging cabinets keep the floor clear for cleaning.
Teclab casework comes in powder-coated steel or 304 stainless steel with a No. 4 finish. Phenolic resin tops resist most common disinfectants, including 60 to 70 percent alcohol solutions. Check your disinfectants against Teclab’s care and maintenance guide before you use them: chlorine-based cleaners, such as bleach, are on the never-use list for powder-coated and stainless steel.
Rust near sinks means water and chemicals keep reaching cabinet surfaces and edges. Replace them with steel or stainless steel casework and a chemical-resistant top with a drip edge or backsplash.
Stainless steel is an option on every Teclab cabinet. Teclab’s Tec-Resin epoxy tops have a drip groove under every exposed edge, and back guards are available. Teclab sinks come in 18-gauge type 304 stainless steel or epoxy resin.
Both are 1-inch-thick, chemical-resistant tops for wet labs. Epoxy resin is molded as one solid piece, so its resistance runs all the way through, and it stands up to acids, alkalis, solvents and physical abuse. Phenolic resin is a strong choice where hygiene, contamination control and frequent disinfecting matter.
Teclab’s Tec-Resin epoxy comes in black, gray and white with a low-sheen satin finish. Phenolic resin comes in white, gray or black over a black core. Compare them on Teclab’s work surfaces page.
Yes, for clean, sanitary work that needs a durable top. Teclab’s stainless steel work surfaces are 16-gauge type 304 stainless steel with a No. 4 brushed satin finish. Corners are welded and ground smooth, reinforcing channels add rigidity, and a sound-deadening undercoat quiets the top.
Clean stainless steel with warm water and mild soap, and avoid steel wool and chlorine cleaners. See Teclab’s work surfaces.
A chemical fume hood protects people from chemical vapors by pulling air away from them and exhausting it. A biosafety cabinet uses HEPA filters to protect people, samples and the room from biological material. Labs that handle both may need both; your safety officer makes the call.
Teclab supplies Labconco fume hoods and Labconco Logic Class II, Type A2 biosafety cabinets, which are NSF-listed.
A ducted hood exhausts air outside through the building’s ductwork and suits general chemistry involving fumes and vapors. A ductless hood filters the air and returns it to the room, so it needs no ducting, but it only suits chemicals its filters can capture.
Teclab supplies Labconco Protector Premier ducted hoods, with a built-in or remote blower, and Protector Echo ductless hoods in 4-, 5-, 6- and 8-foot widths. For a ductless hood, ask for a chemical assessment from a Labconco specialist to confirm the right enclosure and filters for your work.
Keep acids and flammable solvents in separate cabinets built for each, often under the fume hood where they’re used. Never store them together, and follow your fire code and your safety office’s rules on quantities, venting and labeling.
Teclab’s acid storage cabinets, 18 to 48 inches wide, store and vent acids and other corrosive liquids. Its solvent storage cabinets, 24 to 48 inches wide, store and vent flammable liquids and protect their contents in a building fire. See Teclab’s cabinet options.
Teclab’s stainless steel sinks come in single and double bowls, formed of 18-gauge type 304 stainless steel, and its drop-in epoxy resin sinks are ADA compliant. Faucets include hot and cold mixing faucets, vacuum breaker and wall-mounted versions, cold water faucets, and distilled or deionized water faucets.
For safety, Teclab offers a mixing faucet with a built-in eyewash, deck-mounted swing-away and hand-held eyewash stations, and a combination safety shower and eye/face wash. See Teclab’s lab accessories.
Directly from Teclab, the manufacturer. Request a quote, review the price quote and delivery schedule, then place your order. Teclab accepts credit cards, ACH and wire payments, and its How to Order page walks through each step.
Lead time is typically 4 to 16 weeks. Most Teclab projects are built to order, so the time depends on the size of the project and Teclab’s current backlog, and your quote includes the delivery schedule.
Yes. Teclab offers installation services, available virtually anywhere in the world. Installers unload, assemble, position, level and secure the furniture to the approved drawings, then remove the packaging and clean the work area.
Teclab works with your contractors and other trades to keep disruption to your facility to a minimum. Tell us about building access, working hours and any safety or infection-control rules when you request a quote, so installation can be planned around them.
Teclab products are warranted to the original user for 10 years of single-shift service from the date of purchase, given normal use and care. Multi-shift use is pro-rated, and some components have shorter coverage. See the Teclab warranty for details.
A partial list of recent medical, pharmaceutical and research customers that use Teclab lab furniture.
Customer names are listed for reference only and do not imply endorsement by any organization.
Send us your room dimensions, what the lab will be used for and your deadline. Teclab will prepare a layout and a quote, and lab planning and design is free.
If your question isn’t answered here, ask us. Our team is happy to help.
Call 269.372.6000
Email info@teclab.com